Products Description

MMO titanium anodes for swimming pool salt chlorinator cells - a Grade 1 titanium mesh or plate carrying a RuO₂–IrO₂ mixed metal oxide coating. Installed in the electrolytic cell, the anode converts the dissolved salt (3,000–5,000 ppm NaCl) into chlorine, which forms hypochlorous acid and keeps the pool sanitised without dosing liquid chlorine.
Because the oxide coating works at a low chlorine overpotential, the cell reaches its rated chlorine output at a lower voltage and holds a stable output through its service life. We produce plates for both in-line and floating salt water chlorinators, made to the customer's drawing - mesh opening, plate thickness, stud position, coating loading and rated current are confirmed on a drawing before production, so the plates fit existing cell housings without rework.
Product Specifications
| Item | Specification |
| Product | MMO titanium anodes for swimming pool salt chlorinator cells |
| Substrate | Titanium Gr1 (ASTM B265), purity ≥ 99.6% |
| Substrate form | Expanded mesh, woven mesh, perforated plate, solid plate, rod, tube |
| Coating | RuO₂–IrO₂ (standard); IrO₂–Ta₂O₅ for low current density or long-residence duty |
| Coating layers | 8–12 brush-and-sinter cycles |
| Working current density | 50–200 A/m², 100 A/m² recommended for continuous duty |
| Chlorine output matched | 5–50 g/h per cell, according to cell design |
| Water salinity | 3,000–5,000 ppm NaCl |
| Design service life | according to the customer |
| plate thickness | 1.0 / 1.5 / 2.0 mm |
| Mesh wire / opening | Wire 1.0–3.0 mm; opening 3×6, 4×8, 5×10 mm or to drawing |
Key Features
Long-life Ru–Ir oxide coating
The active layer is a rutile-structure RuO₂–IrO₂ solid solution built up in 8–12 coating and sintering cycles, with an iridium-rich layer next to the titanium to slow passivation of the substrate. That structure is what decides how long a salt chlorinator anode lasts: uniform coverage means the coating wears away evenly instead of failing at pinholes.
Stable chlorine output, lower energy input
Low chlorine overpotential keeps cell voltage down, so the same grams-per-hour of chlorine are produced with less power and less heat in the cell - a real difference for units that run several hours a day through the season.
Made to fit your cell
Overall dimensions, mesh opening, stud thread and position, coating loading and rated current are all produced to drawing. For most chlorinator brands we can match the original plate set directly, no housing modification needed.
Coating quality control
Every substrate is degreased and etched before coating; coating weight is recorded piece by piece; a sample from each batch goes through an accelerated life test in sulphuric acid at elevated current density, and the data can be issued with the shipment.
MMO vs Platinized Titanium Anode for Pool Cells
| Comparison | MMO (RuO₂–IrO₂) titanium anode | Platinized (Pt/Ti) anode |
| Active layer | Mixed metal oxide, 10–25 g/m² | Platinum, typically 1–5 μm |
| Behaviour in salt water | Stable under normal cell polarity, tolerant of intermittent operation | Sensitive to polarity reversal and to iron/manganese in water |
| Typical life in pool duty | Several seasons at rated current | Shorter at equal current density; longer only at low current density |
| Cost structure | Lower precious-metal content per plate | Driven by platinum price |
| Best fit | Standard residential and commercial salt cells | Special water chemistry or very low current density designs |
Applications






Installation & Maintenance Tips
01
Never reverse the polarity of an MMO anode unless the controller is designed for it - reverse running consumes the coating.
02
Keep the cell flooded while powered; dry running overheats the plate and destroys the coating.
03
Clean scale with diluted hydrochloric acid (max. 1:10) and a soft brush only - no metal scrapers or abrasive pads.
04
Keep pH 7.2–7.8 and stabiliser within normal range; avoid fluoride-containing water and temperatures above 45 °C.
FAQ
Q: Does a titanium anode require a power supply?
A: Both work in salt water. MMO uses a RuO₂–IrO₂ oxide coating on titanium; platinized uses a thin platinum layer. For pool cells running 3,000–5,000 ppm salt at moderate current density, MMO is the usual choice because it carries less precious metal per plate and tolerates the intermittent operation of a pool. Send us your cell's rated current and chlorine output and we will recommend the coating.
Q: Does a titanium anode require a power supply?
A: Fluoride above about 1 ppm, pH outside 6.5–8.5, water temperature above 45 °C, heavy iron or manganese, and any operation that reverses polarity on an anode not designed for it.
Q: Why are titanium anodes used in salt chlorinators?
A: Titanium provides a corrosion-resistant substrate, while the MMO coating offers excellent electrocatalytic activity for chlorine generation. This combination helps achieve stable electrolysis performance and a long service life.
Q: What is the service life of your MMO titanium anodes?
A: The service life depends on several factors, including operating current density, salt concentration, water chemistry, operating hours and maintenance conditions. We can recommend a suitable coating solution based on your actual working conditions.
Our Certificate




About Us

Ehisen
Ehisen was established in 2004 as a high-tech company specializing in the manufacturing of sophisticated metal materials, including melting, profiling, machining, and research and development of precious metal anodes.Our company, which employs 50 people and occupies a 15 mu area, is focused on innovative manufacturing. Located in Baoji City, Shaanxi Province-also referred to as the "Titanium Valley of China"-the enterprise benefits from a whole industrial chain for metal processing.In order to create an innovation platform and create cutting-edge new energy accessories, we collaborate with nearby businesses.Our primary goals are to deliver high-quality goods and services, such as specialized metal deep process components, support for research and development, and modular product design and manufacturing.
Contact Us
we are here for you
Lorem ipsum dolor sit amet consectetur adipisicing elit.
Hot Tags: mmo titanium anode for swimming pool salt chlorinator, China mmo titanium anode for swimming pool salt chlorinator manufacturers, suppliers, factory, corrosion resistant precious metal anode, durable precious metal anode, manual precious metal anode, Platinum Plated Anode for Hydrogen Rich Water Cups, printed precious metal anode, robust precious metal anode

