Products Description
Platinum plated Nickel foam is a unique functional material with high specific surface area,low gas retention and good electrochemical properties.It is prepared by covering a nickel foam template with a platinum catalytic layer by electrochemical deposition technique,and then using the three-dimensional network structure of the template to enable the formation of porous,high surface area platinum nickel foam materials.
Nickel foam is a porous metal with a three-dimensional fully penetrating mesh structure that is made of nickel foam through high-tech deep processing. The specific gravity is 0.2~0.3, which is 1/4 of water, 1/3 of wood, 1/10 of metal aluminum, and 1/30 of iron. At the same time, the porous structure has wide-frequency sound absorption characteristics. Can be cut, bent, and simply pasted, and has strong thermal conductivity. Homogeneous three-dimensional network structure. It has a filtering effect and has excellent flow stability of gas and fluid.
Product parameters
◢ High cathodic electrocatalytic activity.
◢ Good electrical properties, can be used in batteries,electrolytic cells and other applications where high requirements for electrode materials are required.
◢ It can withstand high temperature,high pressure and other complex environments,and is suitable for various special working environments.
|
The main parameters |
|
|
Project
|
Standard |
|
Name
|
Nickel foam
|
|
Purity
|
≥99.9% |
|
Element
|
(Ni+Co): balance, C≤200, S≤80, Fes100, Cus100, Sis50 ppm
|
|
Porosity |
≥96%
|
|
Hole position
|
Number of holes:PPI110±10PPI |
|
Areal density |
350±25g/m2 |
|
Longitudinal |
≥33,6 N/2cm |
|
resistance |
≥22.4 N/2cm |
|
extend vertically |
≥5% |
|
spread across |
≥10% |
|
Vertical and soft |
≥7 times |
|
Hengrou
|
≥15 times |
|
Exterior |
3. Through holes with a diameter not larger than 3mm or defects of 2mm or 5mm (such as nickel skin, scratches, etc.), or blind holes with a diameter larger than 1mm, the total number of the above three defects on an observation surface with a length of 1m is not more than 10 indivual 4.Ф≤1mm through holes and blind holes, no more than 10 on the 4X4cm observation surface 5. There shall be no more than 3 defects (such as nickel skin and scratches) ≤2mm on the observation surface of 40mmX40mm, and no more than 20 defects on 1m in the length direction. 6. Products are allowed to have watermarks and micro-spots that are not obvious to the naked eye. |
Application fields of platinum plated Nickel foam
1. Fuel cells: The high surface area and catalytic activity of platinum-plated nickel foam can increase the energy output of fuel cells.
2. Wastewater treatment: It can be used in wastewater treatment with better catalytic reduction,which can reduce the pollutants in wastewater.
3. Hydrogen generator: It can be used for hydrogen generator,which can effectively catalyze the hydrolysis reaction.
4.Chemical power supply field: used in nickel metal hydride, nickel cadmium, fuel cells, etc. Nickel foam is the positive and negative electrodes, which doubles the battery performance. The foam-carbon composite electrode material is an ideal material for lithium batteries. This kind of rechargeable battery is widely used in mobile phones, computers, electric scooters, electric bicycles, hybrid cars, electric toy cars, cordless power tools, electronic digital products, etc.
5.Chemical engineering field: It can be used as catalysts and their carriers, filter media, and media in separators (such as oil-water separators, oil-gas separators, automobile exhaust purifiers, air purifiers, electronic cigarettes, range hoods, etc.) because of its The specific surface area is large, so it can reduce energy consumption and improve efficiency.
6.Electrochemical engineering: used for electrolytic hydrogen production, electrocatalytic processes, electrochemical metallurgy, etc., which can significantly improve energy efficiency.
7.Thermal engineering field: It can be used as both a thermal conductive material and an efficient thermal conductive "wick" material for "heat pipes", doubling the efficiency.
8.Functional materials field: can be used as sound-absorbing materials to absorb wave energy: noise reduction, vibration absorption, buffering electromagnetic shielding, stealth technology, flame retardant, thermal insulation, etc.
fuel cell materials
Advantages
The advantages of platinum plated Nickel foam
Ⅰ.High specific surface area and low gas retention rate make it a very good catalyst for use in fuel cells,wastewater treatment,hydrogen generators and other fields.
Ⅱ.Excellent electrochemical properties with a wide range of applications in electrolytic cells,electrochemical synthesis,electronics and energy storage.
Ⅲ.With unique morphology and porous structure,it has wide application prospects in catalysis,filtration,adsorption,etc.
Packaging and Shipping
0.5mm*100mm*100mm/roll
0.5mm*200mm*300mm/roll
1.0mm*100mm*100mm/roll
1.0mm*200mm*300mm/roll
1.6mm* 100mm*100mm/roll
1.6mm* 200mm*300mm/roll
1.6mm* 300mm*0.3m²/roll
1.6mm*20mm*1m²/roll
5mm*300mm*200mm/piece (please consult customer service for product customization)/piece
0.5mm*200mm*1m/roll
0.1mm*200mm*1m/roll
FAQ
Q: What problems should be paid attention to in the maintenance and maintenance of platinum-plated nickel foam?
FAQ
01.Do you have a dedicated R&D team? Can you design a product for us?
02.Can you provide samples? Are there any fees?
03.What is your payment method?
04.How long is your delivery time?
Stock samples: within 3 working days
Bulk order products: 25-30 days under normal circumstances.
05.What is your company's response to the problematic product?
06.What problems should be paid attention to in the maintenance and maintenance of platinum-plated nickel foam?
contact us
we are here for you
admin@ehisen-anode.com
+86 18700703333 Elsa lin
Hot Tags: platinum plated nickel foam, China platinum plated nickel foam manufacturers, suppliers, factory, Platinum Plated Titanium Felt, Platinum Coated Titanium Mesh, platinum plated nickel foam