Name: China High Quality Platinized Titanium Anode Manufacturers Suppliers Factory - Free Sample
Brand: Ehisen
SKU: 211055601

Introduction of titanium anode

Platinized titanium anode consists of a titanium substrate in the form of a metal sheet (or mesh, strip, wire, or tube) and a platinum-plated coating with a thickness of 2 to 5 microns, which has the electrochemical properties of platinum. Platinum is a very good sacrificial anode material, due to the expensive price of platinum, so in the actual industrial production is rarely used directly solid platinum as anode, usually in another metal plated with a layer of platinum, such as titanium, niobium, tantalum substrate, etc., can be coated with a layer of platinum outside as the anode material.

Titanium-based platinum-plated anode product performance

№1. Coating bonding:

Bonding state in accordance with "Q/YHX02-2019 Metal Anodic Plating Layer

Requirements:

Metal anodic coating surface bonding state:After bonding with colorless transparent tape,the tape will not leave black traces.

Combined state of anode coating and substrate:when bending the specimen 180°,the coating should not flake off at the bend.

№2. Coating uniformity:

The uniformity of the coating conforms to the standard of "Metal Anode Coating Q/YHX02-2019

Uniformity ≤15%

№3.Platinized titanium anode enhanced lifespan:

Test temperature	Current Density	Electrolytes	Enhanced life to meet requirements
Exceeds actual operating temperature	Exceeds actual operating current density	Exceeds the actual acidity of the solution	≥240 H

The production method of titanium anode

Titanium anode is an electrocatalytic electrode in electrochemistry,which is coated with a pure titanium matrix and precious metal oxides.

There are three steps
Substrate treatment	Roughing,cleaning and degreasing are required to improve the denseness of the catalyst.
Brush coating	After the substrate is treated,brush coating is applied.The main component of the coating is platinum group metals, which is a mixed solution.
Drying	After the brush coating is finished, dry treatment is carried out and heat treatment is carried out after drying. The whole process above needs to be repeated several times.

The product characteristics of Ehisen

High catalytic activity
Non-polluting
Cost-effective
Very low maintenance of the anode
Increased plating time throughput

●Consistent and optimized plating results by keeping the anode geometry constant over the life of the product

●Long service life

●Low maintenance costs

Application areas

•Non-ferrous metal production and recycling;

electrodeposition produces copper,nickel and cobalt;

•Electroplating:

precious metal plating (gold,silver,rhodium,platinum,ruthenium),copper,nickel,chrome plating chemical plating,printed circuit board gold plating;

•Metal recovery:

plating solution wastewater treatment;

•Cathodic protection:

pipeline cathodic protection,heat exchanger cathodic protection,water pipelines,etc.

FAQ

Q: How can I properly maintain my platinum-coated titanium anode?

A: To maintain your platinum-coated titanium anode,it is important to regularly clean it to prevent any buildup on the surface.Avoid harsh chemicals and abrasive materials when cleaning,and store in a dry and clean environment when not in use.Regular maintenance and inspection can help prolong the lifespan of the anode and ensure consistent electrochemical performance.